Electrical Conduits, Flexible Conduits & Conduit Fittings [25] |
PC Based Motorized Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly
used antennas in VHF-UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode as well as be interfaced
with a computer via USB interface. In this Receiving Antenna can be rotated from 0 to 360 Degrees automatically with the help of Stepper motor
controller unit and accordingly Receiving Antennas Signal strength can be monitored. The system consists of a set of tripod for mounting the
transmitting antenna and another stepper motor controlled antenna positioning pod for mounting the receiving antenna, 22Antennas, RF Transmitter, RF Receiver, Stepper Controller Unit, Antenna Plotting Software and relevant accessories/ cables.
Network Analyser: RFTransmitter & Receiver:
Frequency : 86 - 860 MHz PLL synthesized
Step Size : 0.05, 0.1, 0.25, 0.5, 1, 10, 100 MHz
Accuracy : 0.01%
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory Location : 1000 individual frequencies and level can be stored/recalled
Output Impedance : 50 Ohms
RF Level : 90 dBuVTypical
Measurement : RF level in dBuV with 0.1dB resolution
Dynamic Range : 60 dB Log
Manual/ Auto Mode : Data logging for antenna gain & polar/cartesian plot
USB interface : Easy connectivity to PC using polar pattern plotting software
Power Supply : 230V @ 50 Hz
Stepper Motor Controller Unit:
Rotation : 0-360 Degrees with 1 Deg resolution
Angular Steps : 1, 5, 10, 45 degrees
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory : 1000 memories for storing angular positions for quick recall
Auto mode : Automatic Rotation with Interface to Receiver
Mode : Clockwise/Anti Clockwise Rotation, Fast /Slow Speed
Address: Anand Apartment, 1st Floor, 1st Motisha Cross Lane Love, Lane Byculla East , Mumbai - , India Phone: +(91)-(22)-23502201/02/03/04 Fax:+(91)-(22)-23792331/23792221 |
![]() |
PC Based Motorized Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly
used antennas in VHF-UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode as well as be interfaced
with a computer via USB interface. In this Receiving Antenna can be rotated from 0 to 360 Degrees automatically with the help of Stepper motor
controller unit and accordingly Receiving Antennas Signal strength can be monitored. The system consists of a set of tripod for mounting the
transmitting antenna and another stepper motor controlled antenna positioning pod for mounting the receiving antenna, 22Antennas, RF Transmitter, RF Receiver, Stepper Controller Unit, Antenna Plotting Software and relevant accessories/ cables.
Network Analyser: RFTransmitter & Receiver:
Frequency : 86 - 860 MHz PLL synthesized
Step Size : 0.05, 0.1, 0.25, 0.5, 1, 10, 100 MHz
Accuracy : 0.01%
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory Location : 1000 individual frequencies and level can be stored/recalled
Output Impedance : 50 Ohms
RF Level : 90 dBuVTypical
Measurement : RF level in dBuV with 0.1dB resolution
Dynamic Range : 60 dB Log
Manual/ Auto Mode : Data logging for antenna gain & polar/cartesian plot
USB interface : Easy connectivity to PC using polar pattern plotting software
Power Supply : 230V @ 50 Hz
Stepper Motor Controller Unit:
Rotation : 0-360 Degrees with 1 Deg resolution
Angular Steps : 1, 5, 10, 45 degrees
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory : 1000 memories for storing angular positions for quick recall
Auto mode : Automatic Rotation with Interface to Receiver
Mode : Clockwise/Anti Clockwise Rotation, Fast /Slow Speed
Address: 1st Floor, Jinda Technology Center, No.8 Kefeng Road, High-tech Industrial Park, Nanshan District, Shenzhen, Guangdong, China. , Shenzhen - , China Phone: 86-0755-26616099 Fax:86-0755-26616090 |
![]() |
PC Based Motorized Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly
used antennas in VHF-UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode as well as be interfaced
with a computer via USB interface. In this Receiving Antenna can be rotated from 0 to 360 Degrees automatically with the help of Stepper motor
controller unit and accordingly Receiving Antennas Signal strength can be monitored. The system consists of a set of tripod for mounting the
transmitting antenna and another stepper motor controlled antenna positioning pod for mounting the receiving antenna, 22Antennas, RF Transmitter, RF Receiver, Stepper Controller Unit, Antenna Plotting Software and relevant accessories/ cables.
Network Analyser: RFTransmitter & Receiver:
Frequency : 86 - 860 MHz PLL synthesized
Step Size : 0.05, 0.1, 0.25, 0.5, 1, 10, 100 MHz
Accuracy : 0.01%
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory Location : 1000 individual frequencies and level can be stored/recalled
Output Impedance : 50 Ohms
RF Level : 90 dBuVTypical
Measurement : RF level in dBuV with 0.1dB resolution
Dynamic Range : 60 dB Log
Manual/ Auto Mode : Data logging for antenna gain & polar/cartesian plot
USB interface : Easy connectivity to PC using polar pattern plotting software
Power Supply : 230V @ 50 Hz
Stepper Motor Controller Unit:
Rotation : 0-360 Degrees with 1 Deg resolution
Angular Steps : 1, 5, 10, 45 degrees
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory : 1000 memories for storing angular positions for quick recall
Auto mode : Automatic Rotation with Interface to Receiver
Mode : Clockwise/Anti Clockwise Rotation, Fast /Slow Speed
Address: B-180,mangal Marg, Bapu Nagar , Jaipur - , India Phone: 91-141-2709772 Fax:91-141-4011698 |
![]() |
PC Based Motorized Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly
used antennas in VHF-UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode as well as be interfaced
with a computer via USB interface. In this Receiving Antenna can be rotated from 0 to 360 Degrees automatically with the help of Stepper motor
controller unit and accordingly Receiving Antennas Signal strength can be monitored. The system consists of a set of tripod for mounting the
transmitting antenna and another stepper motor controlled antenna positioning pod for mounting the receiving antenna, 22Antennas, RF Transmitter, RF Receiver, Stepper Controller Unit, Antenna Plotting Software and relevant accessories/ cables.
Network Analyser: RFTransmitter & Receiver:
Frequency : 86 - 860 MHz PLL synthesized
Step Size : 0.05, 0.1, 0.25, 0.5, 1, 10, 100 MHz
Accuracy : 0.01%
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory Location : 1000 individual frequencies and level can be stored/recalled
Output Impedance : 50 Ohms
RF Level : 90 dBuVTypical
Measurement : RF level in dBuV with 0.1dB resolution
Dynamic Range : 60 dB Log
Manual/ Auto Mode : Data logging for antenna gain & polar/cartesian plot
USB interface : Easy connectivity to PC using polar pattern plotting software
Power Supply : 230V @ 50 Hz
Stepper Motor Controller Unit:
Rotation : 0-360 Degrees with 1 Deg resolution
Angular Steps : 1, 5, 10, 45 degrees
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory : 1000 memories for storing angular positions for quick recall
Auto mode : Automatic Rotation with Interface to Receiver
Mode : Clockwise/Anti Clockwise Rotation, Fast /Slow Speed
Address: : B-126/127, Ansa Industrial Estate, Saki Vihar Road, Sakinaka, Andheri (E) , Mumbai - , India Phone: 28477547 Fax:28475672 |
![]() |
PC Based Motorized Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly
used antennas in VHF-UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode as well as be interfaced
with a computer via USB interface. In this Receiving Antenna can be rotated from 0 to 360 Degrees automatically with the help of Stepper motor
controller unit and accordingly Receiving Antennas Signal strength can be monitored. The system consists of a set of tripod for mounting the
transmitting antenna and another stepper motor controlled antenna positioning pod for mounting the receiving antenna, 22Antennas, RF Transmitter, RF Receiver, Stepper Controller Unit, Antenna Plotting Software and relevant accessories/ cables.
Network Analyser: RFTransmitter & Receiver:
Frequency : 86 - 860 MHz PLL synthesized
Step Size : 0.05, 0.1, 0.25, 0.5, 1, 10, 100 MHz
Accuracy : 0.01%
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory Location : 1000 individual frequencies and level can be stored/recalled
Output Impedance : 50 Ohms
RF Level : 90 dBuVTypical
Measurement : RF level in dBuV with 0.1dB resolution
Dynamic Range : 60 dB Log
Manual/ Auto Mode : Data logging for antenna gain & polar/cartesian plot
USB interface : Easy connectivity to PC using polar pattern plotting software
Power Supply : 230V @ 50 Hz
Stepper Motor Controller Unit:
Rotation : 0-360 Degrees with 1 Deg resolution
Angular Steps : 1, 5, 10, 45 degrees
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory : 1000 memories for storing angular positions for quick recall
Auto mode : Automatic Rotation with Interface to Receiver
Mode : Clockwise/Anti Clockwise Rotation, Fast /Slow Speed
Address: 10/153rd Floor, Mmh Complex, Natesan Street Above Hotel Kumara Bhavan(near Mambalam Railway Station) T.nagar, Ch-17. Phone:044- , Chennai - , India Phone: 91-044-65360606 |
![]() |
PC Based Motorized Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly
used antennas in VHF-UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode as well as be interfaced
with a computer via USB interface. In this Receiving Antenna can be rotated from 0 to 360 Degrees automatically with the help of Stepper motor
controller unit and accordingly Receiving Antennas Signal strength can be monitored. The system consists of a set of tripod for mounting the
transmitting antenna and another stepper motor controlled antenna positioning pod for mounting the receiving antenna, 22Antennas, RF Transmitter, RF Receiver, Stepper Controller Unit, Antenna Plotting Software and relevant accessories/ cables.
Network Analyser: RFTransmitter & Receiver:
Frequency : 86 - 860 MHz PLL synthesized
Step Size : 0.05, 0.1, 0.25, 0.5, 1, 10, 100 MHz
Accuracy : 0.01%
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory Location : 1000 individual frequencies and level can be stored/recalled
Output Impedance : 50 Ohms
RF Level : 90 dBuVTypical
Measurement : RF level in dBuV with 0.1dB resolution
Dynamic Range : 60 dB Log
Manual/ Auto Mode : Data logging for antenna gain & polar/cartesian plot
USB interface : Easy connectivity to PC using polar pattern plotting software
Power Supply : 230V @ 50 Hz
Stepper Motor Controller Unit:
Rotation : 0-360 Degrees with 1 Deg resolution
Angular Steps : 1, 5, 10, 45 degrees
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory : 1000 memories for storing angular positions for quick recall
Auto mode : Automatic Rotation with Interface to Receiver
Mode : Clockwise/Anti Clockwise Rotation, Fast /Slow Speed
Address: 109, 52, New Rajinder Nagar, Industrial Area, Opp. Of Dass Hitachi LLd., Sahibabad , Ghaziabad - , India Phone: 4624615, 4627289 Fax:4625752 |
![]() |
PC Based Motorized Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly
used antennas in VHF-UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode as well as be interfaced
with a computer via USB interface. In this Receiving Antenna can be rotated from 0 to 360 Degrees automatically with the help of Stepper motor
controller unit and accordingly Receiving Antennas Signal strength can be monitored. The system consists of a set of tripod for mounting the
transmitting antenna and another stepper motor controlled antenna positioning pod for mounting the receiving antenna, 22Antennas, RF Transmitter, RF Receiver, Stepper Controller Unit, Antenna Plotting Software and relevant accessories/ cables.
Network Analyser: RFTransmitter & Receiver:
Frequency : 86 - 860 MHz PLL synthesized
Step Size : 0.05, 0.1, 0.25, 0.5, 1, 10, 100 MHz
Accuracy : 0.01%
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory Location : 1000 individual frequencies and level can be stored/recalled
Output Impedance : 50 Ohms
RF Level : 90 dBuVTypical
Measurement : RF level in dBuV with 0.1dB resolution
Dynamic Range : 60 dB Log
Manual/ Auto Mode : Data logging for antenna gain & polar/cartesian plot
USB interface : Easy connectivity to PC using polar pattern plotting software
Power Supply : 230V @ 50 Hz
Stepper Motor Controller Unit:
Rotation : 0-360 Degrees with 1 Deg resolution
Angular Steps : 1, 5, 10, 45 degrees
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory : 1000 memories for storing angular positions for quick recall
Auto mode : Automatic Rotation with Interface to Receiver
Mode : Clockwise/Anti Clockwise Rotation, Fast /Slow Speed
Address: Eastern Suburb Yucheng , Baoding - , China Phone: 86-312-8086388 Fax:-- |
![]() |
PC Based Motorized Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly
used antennas in VHF-UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode as well as be interfaced
with a computer via USB interface. In this Receiving Antenna can be rotated from 0 to 360 Degrees automatically with the help of Stepper motor
controller unit and accordingly Receiving Antennas Signal strength can be monitored. The system consists of a set of tripod for mounting the
transmitting antenna and another stepper motor controlled antenna positioning pod for mounting the receiving antenna, 22Antennas, RF Transmitter, RF Receiver, Stepper Controller Unit, Antenna Plotting Software and relevant accessories/ cables.
Network Analyser: RFTransmitter & Receiver:
Frequency : 86 - 860 MHz PLL synthesized
Step Size : 0.05, 0.1, 0.25, 0.5, 1, 10, 100 MHz
Accuracy : 0.01%
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory Location : 1000 individual frequencies and level can be stored/recalled
Output Impedance : 50 Ohms
RF Level : 90 dBuVTypical
Measurement : RF level in dBuV with 0.1dB resolution
Dynamic Range : 60 dB Log
Manual/ Auto Mode : Data logging for antenna gain & polar/cartesian plot
USB interface : Easy connectivity to PC using polar pattern plotting software
Power Supply : 230V @ 50 Hz
Stepper Motor Controller Unit:
Rotation : 0-360 Degrees with 1 Deg resolution
Angular Steps : 1, 5, 10, 45 degrees
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory : 1000 memories for storing angular positions for quick recall
Auto mode : Automatic Rotation with Interface to Receiver
Mode : Clockwise/Anti Clockwise Rotation, Fast /Slow Speed
Address: No. 139, 2nd Main Road, 8th Cross, Chamrajpet , Banagalore - , India Phone: +(91)-(80)-26603114 Fax:+(91)-(80)-22423552 |
![]() |
PC Based Motorized Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly
used antennas in VHF-UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode as well as be interfaced
with a computer via USB interface. In this Receiving Antenna can be rotated from 0 to 360 Degrees automatically with the help of Stepper motor
controller unit and accordingly Receiving Antennas Signal strength can be monitored. The system consists of a set of tripod for mounting the
transmitting antenna and another stepper motor controlled antenna positioning pod for mounting the receiving antenna, 22Antennas, RF Transmitter, RF Receiver, Stepper Controller Unit, Antenna Plotting Software and relevant accessories/ cables.
Network Analyser: RFTransmitter & Receiver:
Frequency : 86 - 860 MHz PLL synthesized
Step Size : 0.05, 0.1, 0.25, 0.5, 1, 10, 100 MHz
Accuracy : 0.01%
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory Location : 1000 individual frequencies and level can be stored/recalled
Output Impedance : 50 Ohms
RF Level : 90 dBuVTypical
Measurement : RF level in dBuV with 0.1dB resolution
Dynamic Range : 60 dB Log
Manual/ Auto Mode : Data logging for antenna gain & polar/cartesian plot
USB interface : Easy connectivity to PC using polar pattern plotting software
Power Supply : 230V @ 50 Hz
Stepper Motor Controller Unit:
Rotation : 0-360 Degrees with 1 Deg resolution
Angular Steps : 1, 5, 10, 45 degrees
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory : 1000 memories for storing angular positions for quick recall
Auto mode : Automatic Rotation with Interface to Receiver
Mode : Clockwise/Anti Clockwise Rotation, Fast /Slow Speed
Address: E-33, Sector - 7 , Noida - , India Phone: +91-120-2423192 Fax:+91-120-4211029 |
![]() |
PC Based Motorized Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly
used antennas in VHF-UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode as well as be interfaced
with a computer via USB interface. In this Receiving Antenna can be rotated from 0 to 360 Degrees automatically with the help of Stepper motor
controller unit and accordingly Receiving Antennas Signal strength can be monitored. The system consists of a set of tripod for mounting the
transmitting antenna and another stepper motor controlled antenna positioning pod for mounting the receiving antenna, 22Antennas, RF Transmitter, RF Receiver, Stepper Controller Unit, Antenna Plotting Software and relevant accessories/ cables.
Network Analyser: RFTransmitter & Receiver:
Frequency : 86 - 860 MHz PLL synthesized
Step Size : 0.05, 0.1, 0.25, 0.5, 1, 10, 100 MHz
Accuracy : 0.01%
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory Location : 1000 individual frequencies and level can be stored/recalled
Output Impedance : 50 Ohms
RF Level : 90 dBuVTypical
Measurement : RF level in dBuV with 0.1dB resolution
Dynamic Range : 60 dB Log
Manual/ Auto Mode : Data logging for antenna gain & polar/cartesian plot
USB interface : Easy connectivity to PC using polar pattern plotting software
Power Supply : 230V @ 50 Hz
Stepper Motor Controller Unit:
Rotation : 0-360 Degrees with 1 Deg resolution
Angular Steps : 1, 5, 10, 45 degrees
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory : 1000 memories for storing angular positions for quick recall
Auto mode : Automatic Rotation with Interface to Receiver
Mode : Clockwise/Anti Clockwise Rotation, Fast /Slow Speed
Address: E-151-152, RIICO Industrial Area , Bhiwadi - , India Phone: +(91)-(1493)-260354 |
![]() |
PC Based Motorized Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly
used antennas in VHF-UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode as well as be interfaced
with a computer via USB interface. In this Receiving Antenna can be rotated from 0 to 360 Degrees automatically with the help of Stepper motor
controller unit and accordingly Receiving Antennas Signal strength can be monitored. The system consists of a set of tripod for mounting the
transmitting antenna and another stepper motor controlled antenna positioning pod for mounting the receiving antenna, 22Antennas, RF Transmitter, RF Receiver, Stepper Controller Unit, Antenna Plotting Software and relevant accessories/ cables.
Network Analyser: RFTransmitter & Receiver:
Frequency : 86 - 860 MHz PLL synthesized
Step Size : 0.05, 0.1, 0.25, 0.5, 1, 10, 100 MHz
Accuracy : 0.01%
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory Location : 1000 individual frequencies and level can be stored/recalled
Output Impedance : 50 Ohms
RF Level : 90 dBuVTypical
Measurement : RF level in dBuV with 0.1dB resolution
Dynamic Range : 60 dB Log
Manual/ Auto Mode : Data logging for antenna gain & polar/cartesian plot
USB interface : Easy connectivity to PC using polar pattern plotting software
Power Supply : 230V @ 50 Hz
Stepper Motor Controller Unit:
Rotation : 0-360 Degrees with 1 Deg resolution
Angular Steps : 1, 5, 10, 45 degrees
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory : 1000 memories for storing angular positions for quick recall
Auto mode : Automatic Rotation with Interface to Receiver
Mode : Clockwise/Anti Clockwise Rotation, Fast /Slow Speed
Address: 632, Hamilton Road, Kashmere Gate, , Delhi - , India Phone: 091-011-09811272402 |
![]() |
PC Based Motorized Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly
used antennas in VHF-UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode as well as be interfaced
with a computer via USB interface. In this Receiving Antenna can be rotated from 0 to 360 Degrees automatically with the help of Stepper motor
controller unit and accordingly Receiving Antennas Signal strength can be monitored. The system consists of a set of tripod for mounting the
transmitting antenna and another stepper motor controlled antenna positioning pod for mounting the receiving antenna, 22Antennas, RF Transmitter, RF Receiver, Stepper Controller Unit, Antenna Plotting Software and relevant accessories/ cables.
Network Analyser: RFTransmitter & Receiver:
Frequency : 86 - 860 MHz PLL synthesized
Step Size : 0.05, 0.1, 0.25, 0.5, 1, 10, 100 MHz
Accuracy : 0.01%
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory Location : 1000 individual frequencies and level can be stored/recalled
Output Impedance : 50 Ohms
RF Level : 90 dBuVTypical
Measurement : RF level in dBuV with 0.1dB resolution
Dynamic Range : 60 dB Log
Manual/ Auto Mode : Data logging for antenna gain & polar/cartesian plot
USB interface : Easy connectivity to PC using polar pattern plotting software
Power Supply : 230V @ 50 Hz
Stepper Motor Controller Unit:
Rotation : 0-360 Degrees with 1 Deg resolution
Angular Steps : 1, 5, 10, 45 degrees
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory : 1000 memories for storing angular positions for quick recall
Auto mode : Automatic Rotation with Interface to Receiver
Mode : Clockwise/Anti Clockwise Rotation, Fast /Slow Speed
Address: No. 35, 2nd Floor, Surve Industrial Estate, Sonawala X Road, No. 1, Behind Post Office, Goregaon East , Mumbai - , India Phone: +(91)-(22)-26850381/26859586 |
![]() |
PC Based Motorized Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly
used antennas in VHF-UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode as well as be interfaced
with a computer via USB interface. In this Receiving Antenna can be rotated from 0 to 360 Degrees automatically with the help of Stepper motor
controller unit and accordingly Receiving Antennas Signal strength can be monitored. The system consists of a set of tripod for mounting the
transmitting antenna and another stepper motor controlled antenna positioning pod for mounting the receiving antenna, 22Antennas, RF Transmitter, RF Receiver, Stepper Controller Unit, Antenna Plotting Software and relevant accessories/ cables.
Network Analyser: RFTransmitter & Receiver:
Frequency : 86 - 860 MHz PLL synthesized
Step Size : 0.05, 0.1, 0.25, 0.5, 1, 10, 100 MHz
Accuracy : 0.01%
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory Location : 1000 individual frequencies and level can be stored/recalled
Output Impedance : 50 Ohms
RF Level : 90 dBuVTypical
Measurement : RF level in dBuV with 0.1dB resolution
Dynamic Range : 60 dB Log
Manual/ Auto Mode : Data logging for antenna gain & polar/cartesian plot
USB interface : Easy connectivity to PC using polar pattern plotting software
Power Supply : 230V @ 50 Hz
Stepper Motor Controller Unit:
Rotation : 0-360 Degrees with 1 Deg resolution
Angular Steps : 1, 5, 10, 45 degrees
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory : 1000 memories for storing angular positions for quick recall
Auto mode : Automatic Rotation with Interface to Receiver
Mode : Clockwise/Anti Clockwise Rotation, Fast /Slow Speed
Address: Jl. Wahidin No. 35 , Medan - , Indonesia Phone: 62-61-76389461 Fax:62-61-76388317 |
![]() |
PC Based Motorized Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly
used antennas in VHF-UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode as well as be interfaced
with a computer via USB interface. In this Receiving Antenna can be rotated from 0 to 360 Degrees automatically with the help of Stepper motor
controller unit and accordingly Receiving Antennas Signal strength can be monitored. The system consists of a set of tripod for mounting the
transmitting antenna and another stepper motor controlled antenna positioning pod for mounting the receiving antenna, 22Antennas, RF Transmitter, RF Receiver, Stepper Controller Unit, Antenna Plotting Software and relevant accessories/ cables.
Network Analyser: RFTransmitter & Receiver:
Frequency : 86 - 860 MHz PLL synthesized
Step Size : 0.05, 0.1, 0.25, 0.5, 1, 10, 100 MHz
Accuracy : 0.01%
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory Location : 1000 individual frequencies and level can be stored/recalled
Output Impedance : 50 Ohms
RF Level : 90 dBuVTypical
Measurement : RF level in dBuV with 0.1dB resolution
Dynamic Range : 60 dB Log
Manual/ Auto Mode : Data logging for antenna gain & polar/cartesian plot
USB interface : Easy connectivity to PC using polar pattern plotting software
Power Supply : 230V @ 50 Hz
Stepper Motor Controller Unit:
Rotation : 0-360 Degrees with 1 Deg resolution
Angular Steps : 1, 5, 10, 45 degrees
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory : 1000 memories for storing angular positions for quick recall
Auto mode : Automatic Rotation with Interface to Receiver
Mode : Clockwise/Anti Clockwise Rotation, Fast /Slow Speed
Address: Lot 7 Se Tibbetts St , Portland - , Uniited States Phone: 01-503-9298018 Fax:-- |
![]() |
PC Based Motorized Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly
used antennas in VHF-UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode as well as be interfaced
with a computer via USB interface. In this Receiving Antenna can be rotated from 0 to 360 Degrees automatically with the help of Stepper motor
controller unit and accordingly Receiving Antennas Signal strength can be monitored. The system consists of a set of tripod for mounting the
transmitting antenna and another stepper motor controlled antenna positioning pod for mounting the receiving antenna, 22Antennas, RF Transmitter, RF Receiver, Stepper Controller Unit, Antenna Plotting Software and relevant accessories/ cables.
Network Analyser: RFTransmitter & Receiver:
Frequency : 86 - 860 MHz PLL synthesized
Step Size : 0.05, 0.1, 0.25, 0.5, 1, 10, 100 MHz
Accuracy : 0.01%
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory Location : 1000 individual frequencies and level can be stored/recalled
Output Impedance : 50 Ohms
RF Level : 90 dBuVTypical
Measurement : RF level in dBuV with 0.1dB resolution
Dynamic Range : 60 dB Log
Manual/ Auto Mode : Data logging for antenna gain & polar/cartesian plot
USB interface : Easy connectivity to PC using polar pattern plotting software
Power Supply : 230V @ 50 Hz
Stepper Motor Controller Unit:
Rotation : 0-360 Degrees with 1 Deg resolution
Angular Steps : 1, 5, 10, 45 degrees
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory : 1000 memories for storing angular positions for quick recall
Auto mode : Automatic Rotation with Interface to Receiver
Mode : Clockwise/Anti Clockwise Rotation, Fast /Slow Speed
Address: YueXing industrial park, Guanlan, Baoan district , Shenzhen - , China Phone: +86-755-81489016,13163772867 Fax:+86-755-81489016 |
![]() |
PC Based Motorized Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly
used antennas in VHF-UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode as well as be interfaced
with a computer via USB interface. In this Receiving Antenna can be rotated from 0 to 360 Degrees automatically with the help of Stepper motor
controller unit and accordingly Receiving Antennas Signal strength can be monitored. The system consists of a set of tripod for mounting the
transmitting antenna and another stepper motor controlled antenna positioning pod for mounting the receiving antenna, 22Antennas, RF Transmitter, RF Receiver, Stepper Controller Unit, Antenna Plotting Software and relevant accessories/ cables.
Network Analyser: RFTransmitter & Receiver:
Frequency : 86 - 860 MHz PLL synthesized
Step Size : 0.05, 0.1, 0.25, 0.5, 1, 10, 100 MHz
Accuracy : 0.01%
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory Location : 1000 individual frequencies and level can be stored/recalled
Output Impedance : 50 Ohms
RF Level : 90 dBuVTypical
Measurement : RF level in dBuV with 0.1dB resolution
Dynamic Range : 60 dB Log
Manual/ Auto Mode : Data logging for antenna gain & polar/cartesian plot
USB interface : Easy connectivity to PC using polar pattern plotting software
Power Supply : 230V @ 50 Hz
Stepper Motor Controller Unit:
Rotation : 0-360 Degrees with 1 Deg resolution
Angular Steps : 1, 5, 10, 45 degrees
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory : 1000 memories for storing angular positions for quick recall
Auto mode : Automatic Rotation with Interface to Receiver
Mode : Clockwise/Anti Clockwise Rotation, Fast /Slow Speed
Address: No.29 Longsheng North Road, Leliu, Shunde , Foshan - , China Phone: +86-757-28613511 Fax:+86-757-28613511 |
![]() |
PC Based Motorized Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly
used antennas in VHF-UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode as well as be interfaced
with a computer via USB interface. In this Receiving Antenna can be rotated from 0 to 360 Degrees automatically with the help of Stepper motor
controller unit and accordingly Receiving Antennas Signal strength can be monitored. The system consists of a set of tripod for mounting the
transmitting antenna and another stepper motor controlled antenna positioning pod for mounting the receiving antenna, 22Antennas, RF Transmitter, RF Receiver, Stepper Controller Unit, Antenna Plotting Software and relevant accessories/ cables.
Network Analyser: RFTransmitter & Receiver:
Frequency : 86 - 860 MHz PLL synthesized
Step Size : 0.05, 0.1, 0.25, 0.5, 1, 10, 100 MHz
Accuracy : 0.01%
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory Location : 1000 individual frequencies and level can be stored/recalled
Output Impedance : 50 Ohms
RF Level : 90 dBuVTypical
Measurement : RF level in dBuV with 0.1dB resolution
Dynamic Range : 60 dB Log
Manual/ Auto Mode : Data logging for antenna gain & polar/cartesian plot
USB interface : Easy connectivity to PC using polar pattern plotting software
Power Supply : 230V @ 50 Hz
Stepper Motor Controller Unit:
Rotation : 0-360 Degrees with 1 Deg resolution
Angular Steps : 1, 5, 10, 45 degrees
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory : 1000 memories for storing angular positions for quick recall
Auto mode : Automatic Rotation with Interface to Receiver
Mode : Clockwise/Anti Clockwise Rotation, Fast /Slow Speed
Address: 33-A, Dayalbagh Colony , Roorkee - , India Phone: +(91)-(1332)-267225 |
![]() |
PC Based Motorized Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly
used antennas in VHF-UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode as well as be interfaced
with a computer via USB interface. In this Receiving Antenna can be rotated from 0 to 360 Degrees automatically with the help of Stepper motor
controller unit and accordingly Receiving Antennas Signal strength can be monitored. The system consists of a set of tripod for mounting the
transmitting antenna and another stepper motor controlled antenna positioning pod for mounting the receiving antenna, 22Antennas, RF Transmitter, RF Receiver, Stepper Controller Unit, Antenna Plotting Software and relevant accessories/ cables.
Network Analyser: RFTransmitter & Receiver:
Frequency : 86 - 860 MHz PLL synthesized
Step Size : 0.05, 0.1, 0.25, 0.5, 1, 10, 100 MHz
Accuracy : 0.01%
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory Location : 1000 individual frequencies and level can be stored/recalled
Output Impedance : 50 Ohms
RF Level : 90 dBuVTypical
Measurement : RF level in dBuV with 0.1dB resolution
Dynamic Range : 60 dB Log
Manual/ Auto Mode : Data logging for antenna gain & polar/cartesian plot
USB interface : Easy connectivity to PC using polar pattern plotting software
Power Supply : 230V @ 50 Hz
Stepper Motor Controller Unit:
Rotation : 0-360 Degrees with 1 Deg resolution
Angular Steps : 1, 5, 10, 45 degrees
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory : 1000 memories for storing angular positions for quick recall
Auto mode : Automatic Rotation with Interface to Receiver
Mode : Clockwise/Anti Clockwise Rotation, Fast /Slow Speed
Address: 24- B, Hadapsar Industrial Estate , Pune - , India Phone: 26870704/26814278 |
![]() |
PC Based Motorized Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly
used antennas in VHF-UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode as well as be interfaced
with a computer via USB interface. In this Receiving Antenna can be rotated from 0 to 360 Degrees automatically with the help of Stepper motor
controller unit and accordingly Receiving Antennas Signal strength can be monitored. The system consists of a set of tripod for mounting the
transmitting antenna and another stepper motor controlled antenna positioning pod for mounting the receiving antenna, 22Antennas, RF Transmitter, RF Receiver, Stepper Controller Unit, Antenna Plotting Software and relevant accessories/ cables.
Network Analyser: RFTransmitter & Receiver:
Frequency : 86 - 860 MHz PLL synthesized
Step Size : 0.05, 0.1, 0.25, 0.5, 1, 10, 100 MHz
Accuracy : 0.01%
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory Location : 1000 individual frequencies and level can be stored/recalled
Output Impedance : 50 Ohms
RF Level : 90 dBuVTypical
Measurement : RF level in dBuV with 0.1dB resolution
Dynamic Range : 60 dB Log
Manual/ Auto Mode : Data logging for antenna gain & polar/cartesian plot
USB interface : Easy connectivity to PC using polar pattern plotting software
Power Supply : 230V @ 50 Hz
Stepper Motor Controller Unit:
Rotation : 0-360 Degrees with 1 Deg resolution
Angular Steps : 1, 5, 10, 45 degrees
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory : 1000 memories for storing angular positions for quick recall
Auto mode : Automatic Rotation with Interface to Receiver
Mode : Clockwise/Anti Clockwise Rotation, Fast /Slow Speed
Address: Rishi Plaza Near Suhag Nagar Crossing Agra Road , Firozabad - , India Phone: 91-11-23874080 Fax:91-11-23874080 |
![]() |
PC Based Motorized Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly
used antennas in VHF-UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode as well as be interfaced
with a computer via USB interface. In this Receiving Antenna can be rotated from 0 to 360 Degrees automatically with the help of Stepper motor
controller unit and accordingly Receiving Antennas Signal strength can be monitored. The system consists of a set of tripod for mounting the
transmitting antenna and another stepper motor controlled antenna positioning pod for mounting the receiving antenna, 22Antennas, RF Transmitter, RF Receiver, Stepper Controller Unit, Antenna Plotting Software and relevant accessories/ cables.
Network Analyser: RFTransmitter & Receiver:
Frequency : 86 - 860 MHz PLL synthesized
Step Size : 0.05, 0.1, 0.25, 0.5, 1, 10, 100 MHz
Accuracy : 0.01%
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory Location : 1000 individual frequencies and level can be stored/recalled
Output Impedance : 50 Ohms
RF Level : 90 dBuVTypical
Measurement : RF level in dBuV with 0.1dB resolution
Dynamic Range : 60 dB Log
Manual/ Auto Mode : Data logging for antenna gain & polar/cartesian plot
USB interface : Easy connectivity to PC using polar pattern plotting software
Power Supply : 230V @ 50 Hz
Stepper Motor Controller Unit:
Rotation : 0-360 Degrees with 1 Deg resolution
Angular Steps : 1, 5, 10, 45 degrees
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory : 1000 memories for storing angular positions for quick recall
Auto mode : Automatic Rotation with Interface to Receiver
Mode : Clockwise/Anti Clockwise Rotation, Fast /Slow Speed
Address: No.38, Yinglun Road, Shanghai , Shanghai - , China Phone: 86-21-50481900 Fax:86-21-50481900 |
![]() |
PC Based Motorized Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly
used antennas in VHF-UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode as well as be interfaced
with a computer via USB interface. In this Receiving Antenna can be rotated from 0 to 360 Degrees automatically with the help of Stepper motor
controller unit and accordingly Receiving Antennas Signal strength can be monitored. The system consists of a set of tripod for mounting the
transmitting antenna and another stepper motor controlled antenna positioning pod for mounting the receiving antenna, 22Antennas, RF Transmitter, RF Receiver, Stepper Controller Unit, Antenna Plotting Software and relevant accessories/ cables.
Network Analyser: RFTransmitter & Receiver:
Frequency : 86 - 860 MHz PLL synthesized
Step Size : 0.05, 0.1, 0.25, 0.5, 1, 10, 100 MHz
Accuracy : 0.01%
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory Location : 1000 individual frequencies and level can be stored/recalled
Output Impedance : 50 Ohms
RF Level : 90 dBuVTypical
Measurement : RF level in dBuV with 0.1dB resolution
Dynamic Range : 60 dB Log
Manual/ Auto Mode : Data logging for antenna gain & polar/cartesian plot
USB interface : Easy connectivity to PC using polar pattern plotting software
Power Supply : 230V @ 50 Hz
Stepper Motor Controller Unit:
Rotation : 0-360 Degrees with 1 Deg resolution
Angular Steps : 1, 5, 10, 45 degrees
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory : 1000 memories for storing angular positions for quick recall
Auto mode : Automatic Rotation with Interface to Receiver
Mode : Clockwise/Anti Clockwise Rotation, Fast /Slow Speed
Address: Rm 3-5, 16/F, Westley Square, 48 Hoi Yuen Road, Kwun Tong, Kowloon , Hong kong - , Hong Kong Phone: 852-2516 6831 Fax:852-2911 2482 |
![]() |
PC Based Motorized Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly
used antennas in VHF-UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode as well as be interfaced
with a computer via USB interface. In this Receiving Antenna can be rotated from 0 to 360 Degrees automatically with the help of Stepper motor
controller unit and accordingly Receiving Antennas Signal strength can be monitored. The system consists of a set of tripod for mounting the
transmitting antenna and another stepper motor controlled antenna positioning pod for mounting the receiving antenna, 22Antennas, RF Transmitter, RF Receiver, Stepper Controller Unit, Antenna Plotting Software and relevant accessories/ cables.
Network Analyser: RFTransmitter & Receiver:
Frequency : 86 - 860 MHz PLL synthesized
Step Size : 0.05, 0.1, 0.25, 0.5, 1, 10, 100 MHz
Accuracy : 0.01%
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory Location : 1000 individual frequencies and level can be stored/recalled
Output Impedance : 50 Ohms
RF Level : 90 dBuVTypical
Measurement : RF level in dBuV with 0.1dB resolution
Dynamic Range : 60 dB Log
Manual/ Auto Mode : Data logging for antenna gain & polar/cartesian plot
USB interface : Easy connectivity to PC using polar pattern plotting software
Power Supply : 230V @ 50 Hz
Stepper Motor Controller Unit:
Rotation : 0-360 Degrees with 1 Deg resolution
Angular Steps : 1, 5, 10, 45 degrees
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory : 1000 memories for storing angular positions for quick recall
Auto mode : Automatic Rotation with Interface to Receiver
Mode : Clockwise/Anti Clockwise Rotation, Fast /Slow Speed
Address: Unit No. 30, Shiv Sambho Chambers, Gorai, Boriwali West , Mumbai - , India Phone: +(91)-(22)-28994944 |
![]() |
Engaged in manufacturer and exporting of wlan booster, wi-fi amplifier, power meter etc.
Address: 9e2, Suhao Plaza, Nanxin Road, Nanshan , Shenzhen - , China Phone: 86-0755-86651985 Fax:86-0755-86651985 |
![]() |
Nickel Foam is widely used in the field of nickel-metal hydride, nickel cadmium, fuel cell and other batteries. Nickel Foam typed positive and negative electrodes, can doublely improve battery performance. Nickel Foam-carbon composite electrode material is also an ideal material for lithium batteries. This kind of rechargeable battery is widely used in mobile phones, computers, electric scooters, electric bicycles, hybrid cars, electric toy cars, cordless power tools, and electronic digital products. Nickel Foam is also an important battery electrode material, used as current collectors in nickel-metal hydride batteries and various batteries.
Continuous nickel foam is mainly used as the skeletal material for batteries. Owing to their born physical and chemical unique structures,nickel foam has been widely used in a variety of industrial field,such as battery,filtration,environmental protection and so on. Their profound performance has won great praise among customers all over the
Address: Building B#,Changsha Headquarter Base,Changsha,Hunan,China.410001 , Changsha - , China Phone: 86-0731-88230452 |
![]() |
PC Based Motorized Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly
used antennas in VHF-UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode as well as be interfaced
with a computer via USB interface. In this Receiving Antenna can be rotated from 0 to 360 Degrees automatically with the help of Stepper motor
controller unit and accordingly Receiving Antennas Signal strength can be monitored. The system consists of a set of tripod for mounting the
transmitting antenna and another stepper motor controlled antenna positioning pod for mounting the receiving antenna, 22Antennas, RF Transmitter, RF Receiver, Stepper Controller Unit, Antenna Plotting Software and relevant accessories/ cables.
Network Analyser: RFTransmitter & Receiver:
Frequency : 86 - 860 MHz PLL synthesized
Step Size : 0.05, 0.1, 0.25, 0.5, 1, 10, 100 MHz
Accuracy : 0.01%
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory Location : 1000 individual frequencies and level can be stored/recalled
Output Impedance : 50 Ohms
RF Level : 90 dBuVTypical
Measurement : RF level in dBuV with 0.1dB resolution
Dynamic Range : 60 dB Log
Manual/ Auto Mode : Data logging for antenna gain & polar/cartesian plot
USB interface : Easy connectivity to PC using polar pattern plotting software
Power Supply : 230V @ 50 Hz
Stepper Motor Controller Unit:
Rotation : 0-360 Degrees with 1 Deg resolution
Angular Steps : 1, 5, 10, 45 degrees
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory : 1000 memories for storing angular positions for quick recall
Auto mode : Automatic Rotation with Interface to Receiver
Mode : Clockwise/Anti Clockwise Rotation, Fast /Slow Speed
Address: 967/2/2, GIDC Estate, Opp, ERDA, Makarpura , Vadodara - , India Phone: 91-265-6671713 Fax:91-265-3932713 |
![]() |
![]() |
![]() |
|||
![]() |
|
![]() |
||
![]() |
![]() |