Electrical Cables, Conductors & Wires [25] |
Model NO:Armoured Power Cable
Voltage:Low and Medium Voltage Cable
Insulation Material:XLPE
Material Shape:Round Wire
Certification:ISO CCC CE VDE SABS
Brand:Lonheo
Numbers of Cores: 1-5
Class of Conductor:Stranded or Solid
Sheath:PVC,PE,LSZH
Trademark: lonheo
Specification: IEC
HS Code: 8544492100
Application: Construction, Underground, Industrial, Power Station
Current: AC Cable
Sheath Material: PVC
Wire Core Material: Copper or Aluminium
Model: Armoured Power Cable
Rated Voltage: Lower and Medium
Size: 1.5-1000mm2
Insulation: PVC,XLPE
Armoured Layer: Steel Wire,Steel Tape
Package: Steel Drum, Wooden Drum, Steel Wooden Drum
Origin: China
Product Description
General Introduction Of PVC OR XLPE Insulation Armoured Power Cable
Specification
1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards.
2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity.
3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA).
4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads.
Characteristic
1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV
2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2
3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement)
4. Conductor Material:
6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL)
6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)
5. Conductor Classification:
The conductor have been divided into 2 classes.
Class 1:Solid Conductor
Class 2:Stranded Conductor
6. Insulation Material:XLPE or PVC
XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties.
PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable.
7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA
Alumnium Armoured: AWA
8. Sheath Material(if have):PVC or PE or Polyolefin
PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability.
Type & Structure:
1. Copper Core-CU
1.CU Core /PVC Insulation/SWA/PVC Sheath
2. CU Core /PVC Insulation/STA/PVC Sheath
3. CU Core /PVC Insulation/AWA/PVC Sheath
4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
2. Aluminium Core-AL
1.AL Core /PVC Insulation/SWA/PVC Sheath
2. AL Core /PVC Insulation/STA/PVC Sheath
3. AL Core /PVC Insulation/AWA/PVC Sheath
4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Plot 3, Ground Floor, Keluskar Road (North), Opp. Park Club, Shivaji Park , Mumbai - , India Phone: 24448989/24448990 Fax:24440669 |
Model NO:Armoured Power Cable
Voltage:Low and Medium Voltage Cable
Insulation Material:XLPE
Material Shape:Round Wire
Certification:ISO CCC CE VDE SABS
Brand:Lonheo
Numbers of Cores: 1-5
Class of Conductor:Stranded or Solid
Sheath:PVC,PE,LSZH
Trademark: lonheo
Specification: IEC
HS Code: 8544492100
Application: Construction, Underground, Industrial, Power Station
Current: AC Cable
Sheath Material: PVC
Wire Core Material: Copper or Aluminium
Model: Armoured Power Cable
Rated Voltage: Lower and Medium
Size: 1.5-1000mm2
Insulation: PVC,XLPE
Armoured Layer: Steel Wire,Steel Tape
Package: Steel Drum, Wooden Drum, Steel Wooden Drum
Origin: China
Product Description
General Introduction Of PVC OR XLPE Insulation Armoured Power Cable
Specification
1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards.
2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity.
3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA).
4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads.
Characteristic
1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV
2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2
3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement)
4. Conductor Material:
6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL)
6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)
5. Conductor Classification:
The conductor have been divided into 2 classes.
Class 1:Solid Conductor
Class 2:Stranded Conductor
6. Insulation Material:XLPE or PVC
XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties.
PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable.
7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA
Alumnium Armoured: AWA
8. Sheath Material(if have):PVC or PE or Polyolefin
PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability.
Type & Structure:
1. Copper Core-CU
1.CU Core /PVC Insulation/SWA/PVC Sheath
2. CU Core /PVC Insulation/STA/PVC Sheath
3. CU Core /PVC Insulation/AWA/PVC Sheath
4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
2. Aluminium Core-AL
1.AL Core /PVC Insulation/SWA/PVC Sheath
2. AL Core /PVC Insulation/STA/PVC Sheath
3. AL Core /PVC Insulation/AWA/PVC Sheath
4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: No.2, 17 Bystreet, Yucai East Road, Anping County , Hengshui - , China Phone: 7589136 Fax:7589536 |
Model NO:Armoured Power Cable
Voltage:Low and Medium Voltage Cable
Insulation Material:XLPE
Material Shape:Round Wire
Certification:ISO CCC CE VDE SABS
Brand:Lonheo
Numbers of Cores: 1-5
Class of Conductor:Stranded or Solid
Sheath:PVC,PE,LSZH
Trademark: lonheo
Specification: IEC
HS Code: 8544492100
Application: Construction, Underground, Industrial, Power Station
Current: AC Cable
Sheath Material: PVC
Wire Core Material: Copper or Aluminium
Model: Armoured Power Cable
Rated Voltage: Lower and Medium
Size: 1.5-1000mm2
Insulation: PVC,XLPE
Armoured Layer: Steel Wire,Steel Tape
Package: Steel Drum, Wooden Drum, Steel Wooden Drum
Origin: China
Product Description
General Introduction Of PVC OR XLPE Insulation Armoured Power Cable
Specification
1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards.
2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity.
3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA).
4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads.
Characteristic
1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV
2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2
3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement)
4. Conductor Material:
6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL)
6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)
5. Conductor Classification:
The conductor have been divided into 2 classes.
Class 1:Solid Conductor
Class 2:Stranded Conductor
6. Insulation Material:XLPE or PVC
XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties.
PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable.
7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA
Alumnium Armoured: AWA
8. Sheath Material(if have):PVC or PE or Polyolefin
PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability.
Type & Structure:
1. Copper Core-CU
1.CU Core /PVC Insulation/SWA/PVC Sheath
2. CU Core /PVC Insulation/STA/PVC Sheath
3. CU Core /PVC Insulation/AWA/PVC Sheath
4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
2. Aluminium Core-AL
1.AL Core /PVC Insulation/SWA/PVC Sheath
2. AL Core /PVC Insulation/STA/PVC Sheath
3. AL Core /PVC Insulation/AWA/PVC Sheath
4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: WZ-88, Ramgarh Colony, Gali No. 11-12, Najaf Garh Road Opp. Kirti Nagar, New Delhi , Delhi - , India Phone: 25410970/25410966 Fax:25179102 |
Model NO:Armoured Power Cable
Voltage:Low and Medium Voltage Cable
Insulation Material:XLPE
Material Shape:Round Wire
Certification:ISO CCC CE VDE SABS
Brand:Lonheo
Numbers of Cores: 1-5
Class of Conductor:Stranded or Solid
Sheath:PVC,PE,LSZH
Trademark: lonheo
Specification: IEC
HS Code: 8544492100
Application: Construction, Underground, Industrial, Power Station
Current: AC Cable
Sheath Material: PVC
Wire Core Material: Copper or Aluminium
Model: Armoured Power Cable
Rated Voltage: Lower and Medium
Size: 1.5-1000mm2
Insulation: PVC,XLPE
Armoured Layer: Steel Wire,Steel Tape
Package: Steel Drum, Wooden Drum, Steel Wooden Drum
Origin: China
Product Description
General Introduction Of PVC OR XLPE Insulation Armoured Power Cable
Specification
1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards.
2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity.
3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA).
4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads.
Characteristic
1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV
2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2
3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement)
4. Conductor Material:
6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL)
6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)
5. Conductor Classification:
The conductor have been divided into 2 classes.
Class 1:Solid Conductor
Class 2:Stranded Conductor
6. Insulation Material:XLPE or PVC
XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties.
PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable.
7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA
Alumnium Armoured: AWA
8. Sheath Material(if have):PVC or PE or Polyolefin
PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability.
Type & Structure:
1. Copper Core-CU
1.CU Core /PVC Insulation/SWA/PVC Sheath
2. CU Core /PVC Insulation/STA/PVC Sheath
3. CU Core /PVC Insulation/AWA/PVC Sheath
4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
2. Aluminium Core-AL
1.AL Core /PVC Insulation/SWA/PVC Sheath
2. AL Core /PVC Insulation/STA/PVC Sheath
3. AL Core /PVC Insulation/AWA/PVC Sheath
4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Rivia-gf7/89b,sundaram,sion Circle,mumbai-22 , Mumbai - , India Phone: 91-22-24077291 |
Model NO:Armoured Power Cable
Voltage:Low and Medium Voltage Cable
Insulation Material:XLPE
Material Shape:Round Wire
Certification:ISO CCC CE VDE SABS
Brand:Lonheo
Numbers of Cores: 1-5
Class of Conductor:Stranded or Solid
Sheath:PVC,PE,LSZH
Trademark: lonheo
Specification: IEC
HS Code: 8544492100
Application: Construction, Underground, Industrial, Power Station
Current: AC Cable
Sheath Material: PVC
Wire Core Material: Copper or Aluminium
Model: Armoured Power Cable
Rated Voltage: Lower and Medium
Size: 1.5-1000mm2
Insulation: PVC,XLPE
Armoured Layer: Steel Wire,Steel Tape
Package: Steel Drum, Wooden Drum, Steel Wooden Drum
Origin: China
Product Description
General Introduction Of PVC OR XLPE Insulation Armoured Power Cable
Specification
1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards.
2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity.
3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA).
4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads.
Characteristic
1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV
2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2
3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement)
4. Conductor Material:
6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL)
6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)
5. Conductor Classification:
The conductor have been divided into 2 classes.
Class 1:Solid Conductor
Class 2:Stranded Conductor
6. Insulation Material:XLPE or PVC
XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties.
PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable.
7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA
Alumnium Armoured: AWA
8. Sheath Material(if have):PVC or PE or Polyolefin
PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability.
Type & Structure:
1. Copper Core-CU
1.CU Core /PVC Insulation/SWA/PVC Sheath
2. CU Core /PVC Insulation/STA/PVC Sheath
3. CU Core /PVC Insulation/AWA/PVC Sheath
4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
2. Aluminium Core-AL
1.AL Core /PVC Insulation/SWA/PVC Sheath
2. AL Core /PVC Insulation/STA/PVC Sheath
3. AL Core /PVC Insulation/AWA/PVC Sheath
4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Perpa Tic Merk A Bl K8 No.787 , Sisli - , Turkey Phone: 3202346 Fax:2105925 |
Model NO:Armoured Power Cable
Voltage:Low and Medium Voltage Cable
Insulation Material:XLPE
Material Shape:Round Wire
Certification:ISO CCC CE VDE SABS
Brand:Lonheo
Numbers of Cores: 1-5
Class of Conductor:Stranded or Solid
Sheath:PVC,PE,LSZH
Trademark: lonheo
Specification: IEC
HS Code: 8544492100
Application: Construction, Underground, Industrial, Power Station
Current: AC Cable
Sheath Material: PVC
Wire Core Material: Copper or Aluminium
Model: Armoured Power Cable
Rated Voltage: Lower and Medium
Size: 1.5-1000mm2
Insulation: PVC,XLPE
Armoured Layer: Steel Wire,Steel Tape
Package: Steel Drum, Wooden Drum, Steel Wooden Drum
Origin: China
Product Description
General Introduction Of PVC OR XLPE Insulation Armoured Power Cable
Specification
1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards.
2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity.
3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA).
4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads.
Characteristic
1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV
2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2
3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement)
4. Conductor Material:
6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL)
6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)
5. Conductor Classification:
The conductor have been divided into 2 classes.
Class 1:Solid Conductor
Class 2:Stranded Conductor
6. Insulation Material:XLPE or PVC
XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties.
PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable.
7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA
Alumnium Armoured: AWA
8. Sheath Material(if have):PVC or PE or Polyolefin
PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability.
Type & Structure:
1. Copper Core-CU
1.CU Core /PVC Insulation/SWA/PVC Sheath
2. CU Core /PVC Insulation/STA/PVC Sheath
3. CU Core /PVC Insulation/AWA/PVC Sheath
4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
2. Aluminium Core-AL
1.AL Core /PVC Insulation/SWA/PVC Sheath
2. AL Core /PVC Insulation/STA/PVC Sheath
3. AL Core /PVC Insulation/AWA/PVC Sheath
4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Hilite Cables, #528/4, Gali No. 6, Vishwas Nagar, Shahdara , Delhi - , India Phone: 9868283768 |
Model NO:Armoured Power Cable
Voltage:Low and Medium Voltage Cable
Insulation Material:XLPE
Material Shape:Round Wire
Certification:ISO CCC CE VDE SABS
Brand:Lonheo
Numbers of Cores: 1-5
Class of Conductor:Stranded or Solid
Sheath:PVC,PE,LSZH
Trademark: lonheo
Specification: IEC
HS Code: 8544492100
Application: Construction, Underground, Industrial, Power Station
Current: AC Cable
Sheath Material: PVC
Wire Core Material: Copper or Aluminium
Model: Armoured Power Cable
Rated Voltage: Lower and Medium
Size: 1.5-1000mm2
Insulation: PVC,XLPE
Armoured Layer: Steel Wire,Steel Tape
Package: Steel Drum, Wooden Drum, Steel Wooden Drum
Origin: China
Product Description
General Introduction Of PVC OR XLPE Insulation Armoured Power Cable
Specification
1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards.
2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity.
3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA).
4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads.
Characteristic
1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV
2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2
3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement)
4. Conductor Material:
6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL)
6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)
5. Conductor Classification:
The conductor have been divided into 2 classes.
Class 1:Solid Conductor
Class 2:Stranded Conductor
6. Insulation Material:XLPE or PVC
XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties.
PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable.
7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA
Alumnium Armoured: AWA
8. Sheath Material(if have):PVC or PE or Polyolefin
PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability.
Type & Structure:
1. Copper Core-CU
1.CU Core /PVC Insulation/SWA/PVC Sheath
2. CU Core /PVC Insulation/STA/PVC Sheath
3. CU Core /PVC Insulation/AWA/PVC Sheath
4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
2. Aluminium Core-AL
1.AL Core /PVC Insulation/SWA/PVC Sheath
2. AL Core /PVC Insulation/STA/PVC Sheath
3. AL Core /PVC Insulation/AWA/PVC Sheath
4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Plot No. 26-B, Lati Bazar Vibhag-3, Gitamandir , Ahmedabad - , India Phone: 91-79-25322353 Fax:91-79-25321603 |
Model NO:Armoured Power Cable
Voltage:Low and Medium Voltage Cable
Insulation Material:XLPE
Material Shape:Round Wire
Certification:ISO CCC CE VDE SABS
Brand:Lonheo
Numbers of Cores: 1-5
Class of Conductor:Stranded or Solid
Sheath:PVC,PE,LSZH
Trademark: lonheo
Specification: IEC
HS Code: 8544492100
Application: Construction, Underground, Industrial, Power Station
Current: AC Cable
Sheath Material: PVC
Wire Core Material: Copper or Aluminium
Model: Armoured Power Cable
Rated Voltage: Lower and Medium
Size: 1.5-1000mm2
Insulation: PVC,XLPE
Armoured Layer: Steel Wire,Steel Tape
Package: Steel Drum, Wooden Drum, Steel Wooden Drum
Origin: China
Product Description
General Introduction Of PVC OR XLPE Insulation Armoured Power Cable
Specification
1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards.
2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity.
3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA).
4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads.
Characteristic
1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV
2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2
3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement)
4. Conductor Material:
6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL)
6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)
5. Conductor Classification:
The conductor have been divided into 2 classes.
Class 1:Solid Conductor
Class 2:Stranded Conductor
6. Insulation Material:XLPE or PVC
XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties.
PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable.
7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA
Alumnium Armoured: AWA
8. Sheath Material(if have):PVC or PE or Polyolefin
PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability.
Type & Structure:
1. Copper Core-CU
1.CU Core /PVC Insulation/SWA/PVC Sheath
2. CU Core /PVC Insulation/STA/PVC Sheath
3. CU Core /PVC Insulation/AWA/PVC Sheath
4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
2. Aluminium Core-AL
1.AL Core /PVC Insulation/SWA/PVC Sheath
2. AL Core /PVC Insulation/STA/PVC Sheath
3. AL Core /PVC Insulation/AWA/PVC Sheath
4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: No.218, Zhonghuan Road, Fu'An Industry Park, Jiaozhou, Qingdao - 266300 , Qingdao - , China Phone: 86-532-82298197 |
Shielded / Instrumentation cables
RS 485 Cables
Braided Cables
Fire Survival Cables
Rubber Cables
Silicone Cables
Audio-Video Cables
Spiral Cables
Electric Vehicle Cables
ADSS Fiber Cables
Medical Cables assemblies
Military / Defense Cables
Special Customized Cables
Address: 3815, Babu Wali Gali, Mori Gate, , Delhi - , India Phone: |
Model NO:Armoured Power Cable
Voltage:Low and Medium Voltage Cable
Insulation Material:XLPE
Material Shape:Round Wire
Certification:ISO CCC CE VDE SABS
Brand:Lonheo
Numbers of Cores: 1-5
Class of Conductor:Stranded or Solid
Sheath:PVC,PE,LSZH
Trademark: lonheo
Specification: IEC
HS Code: 8544492100
Application: Construction, Underground, Industrial, Power Station
Current: AC Cable
Sheath Material: PVC
Wire Core Material: Copper or Aluminium
Model: Armoured Power Cable
Rated Voltage: Lower and Medium
Size: 1.5-1000mm2
Insulation: PVC,XLPE
Armoured Layer: Steel Wire,Steel Tape
Package: Steel Drum, Wooden Drum, Steel Wooden Drum
Origin: China
Product Description
General Introduction Of PVC OR XLPE Insulation Armoured Power Cable
Specification
1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards.
2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity.
3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA).
4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads.
Characteristic
1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV
2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2
3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement)
4. Conductor Material:
6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL)
6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)
5. Conductor Classification:
The conductor have been divided into 2 classes.
Class 1:Solid Conductor
Class 2:Stranded Conductor
6. Insulation Material:XLPE or PVC
XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties.
PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable.
7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA
Alumnium Armoured: AWA
8. Sheath Material(if have):PVC or PE or Polyolefin
PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability.
Type & Structure:
1. Copper Core-CU
1.CU Core /PVC Insulation/SWA/PVC Sheath
2. CU Core /PVC Insulation/STA/PVC Sheath
3. CU Core /PVC Insulation/AWA/PVC Sheath
4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
2. Aluminium Core-AL
1.AL Core /PVC Insulation/SWA/PVC Sheath
2. AL Core /PVC Insulation/STA/PVC Sheath
3. AL Core /PVC Insulation/AWA/PVC Sheath
4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 198, 3rd Floor, R.R. Roy Marg, Above Bank Of Saurashtra, Prathna Samaj, Charni Road (E) , Mumbai - , India Phone: 91-22-23822216/30022216 Fax:91-22-23859396 |
Model NO:Armoured Power Cable
Voltage:Low and Medium Voltage Cable
Insulation Material:XLPE
Material Shape:Round Wire
Certification:ISO CCC CE VDE SABS
Brand:Lonheo
Numbers of Cores: 1-5
Class of Conductor:Stranded or Solid
Sheath:PVC,PE,LSZH
Trademark: lonheo
Specification: IEC
HS Code: 8544492100
Application: Construction, Underground, Industrial, Power Station
Current: AC Cable
Sheath Material: PVC
Wire Core Material: Copper or Aluminium
Model: Armoured Power Cable
Rated Voltage: Lower and Medium
Size: 1.5-1000mm2
Insulation: PVC,XLPE
Armoured Layer: Steel Wire,Steel Tape
Package: Steel Drum, Wooden Drum, Steel Wooden Drum
Origin: China
Product Description
General Introduction Of PVC OR XLPE Insulation Armoured Power Cable
Specification
1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards.
2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity.
3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA).
4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads.
Characteristic
1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV
2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2
3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement)
4. Conductor Material:
6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL)
6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)
5. Conductor Classification:
The conductor have been divided into 2 classes.
Class 1:Solid Conductor
Class 2:Stranded Conductor
6. Insulation Material:XLPE or PVC
XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties.
PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable.
7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA
Alumnium Armoured: AWA
8. Sheath Material(if have):PVC or PE or Polyolefin
PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability.
Type & Structure:
1. Copper Core-CU
1.CU Core /PVC Insulation/SWA/PVC Sheath
2. CU Core /PVC Insulation/STA/PVC Sheath
3. CU Core /PVC Insulation/AWA/PVC Sheath
4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
2. Aluminium Core-AL
1.AL Core /PVC Insulation/SWA/PVC Sheath
2. AL Core /PVC Insulation/STA/PVC Sheath
3. AL Core /PVC Insulation/AWA/PVC Sheath
4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Green House, 152, Makarpura Gidc , Vadodara - , India Phone: 91-0265-3046100 |
Model NO:Armoured Power Cable
Voltage:Low and Medium Voltage Cable
Insulation Material:XLPE
Material Shape:Round Wire
Certification:ISO CCC CE VDE SABS
Brand:Lonheo
Numbers of Cores: 1-5
Class of Conductor:Stranded or Solid
Sheath:PVC,PE,LSZH
Trademark: lonheo
Specification: IEC
HS Code: 8544492100
Application: Construction, Underground, Industrial, Power Station
Current: AC Cable
Sheath Material: PVC
Wire Core Material: Copper or Aluminium
Model: Armoured Power Cable
Rated Voltage: Lower and Medium
Size: 1.5-1000mm2
Insulation: PVC,XLPE
Armoured Layer: Steel Wire,Steel Tape
Package: Steel Drum, Wooden Drum, Steel Wooden Drum
Origin: China
Product Description
General Introduction Of PVC OR XLPE Insulation Armoured Power Cable
Specification
1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards.
2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity.
3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA).
4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads.
Characteristic
1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV
2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2
3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement)
4. Conductor Material:
6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL)
6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)
5. Conductor Classification:
The conductor have been divided into 2 classes.
Class 1:Solid Conductor
Class 2:Stranded Conductor
6. Insulation Material:XLPE or PVC
XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties.
PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable.
7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA
Alumnium Armoured: AWA
8. Sheath Material(if have):PVC or PE or Polyolefin
PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability.
Type & Structure:
1. Copper Core-CU
1.CU Core /PVC Insulation/SWA/PVC Sheath
2. CU Core /PVC Insulation/STA/PVC Sheath
3. CU Core /PVC Insulation/AWA/PVC Sheath
4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
2. Aluminium Core-AL
1.AL Core /PVC Insulation/SWA/PVC Sheath
2. AL Core /PVC Insulation/STA/PVC Sheath
3. AL Core /PVC Insulation/AWA/PVC Sheath
4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: No.3, Bicun North Road, Xinhua Street, Huadu District, Guangzhou - 510800 , Guangzhou - , China Phone: 86-20-61867710 |
Model NO:Armoured Power Cable
Voltage:Low and Medium Voltage Cable
Insulation Material:XLPE
Material Shape:Round Wire
Certification:ISO CCC CE VDE SABS
Brand:Lonheo
Numbers of Cores: 1-5
Class of Conductor:Stranded or Solid
Sheath:PVC,PE,LSZH
Trademark: lonheo
Specification: IEC
HS Code: 8544492100
Application: Construction, Underground, Industrial, Power Station
Current: AC Cable
Sheath Material: PVC
Wire Core Material: Copper or Aluminium
Model: Armoured Power Cable
Rated Voltage: Lower and Medium
Size: 1.5-1000mm2
Insulation: PVC,XLPE
Armoured Layer: Steel Wire,Steel Tape
Package: Steel Drum, Wooden Drum, Steel Wooden Drum
Origin: China
Product Description
General Introduction Of PVC OR XLPE Insulation Armoured Power Cable
Specification
1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards.
2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity.
3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA).
4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads.
Characteristic
1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV
2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2
3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement)
4. Conductor Material:
6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL)
6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)
5. Conductor Classification:
The conductor have been divided into 2 classes.
Class 1:Solid Conductor
Class 2:Stranded Conductor
6. Insulation Material:XLPE or PVC
XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties.
PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable.
7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA
Alumnium Armoured: AWA
8. Sheath Material(if have):PVC or PE or Polyolefin
PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability.
Type & Structure:
1. Copper Core-CU
1.CU Core /PVC Insulation/SWA/PVC Sheath
2. CU Core /PVC Insulation/STA/PVC Sheath
3. CU Core /PVC Insulation/AWA/PVC Sheath
4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
2. Aluminium Core-AL
1.AL Core /PVC Insulation/SWA/PVC Sheath
2. AL Core /PVC Insulation/STA/PVC Sheath
3. AL Core /PVC Insulation/AWA/PVC Sheath
4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 6-2-231/B, Kukatpally , Hyderabad - , India Phone: 91-40-3056850 Fax:91-40-3057038 |
Model NO:Armoured Power Cable
Voltage:Low and Medium Voltage Cable
Insulation Material:XLPE
Material Shape:Round Wire
Certification:ISO CCC CE VDE SABS
Brand:Lonheo
Numbers of Cores: 1-5
Class of Conductor:Stranded or Solid
Sheath:PVC,PE,LSZH
Trademark: lonheo
Specification: IEC
HS Code: 8544492100
Application: Construction, Underground, Industrial, Power Station
Current: AC Cable
Sheath Material: PVC
Wire Core Material: Copper or Aluminium
Model: Armoured Power Cable
Rated Voltage: Lower and Medium
Size: 1.5-1000mm2
Insulation: PVC,XLPE
Armoured Layer: Steel Wire,Steel Tape
Package: Steel Drum, Wooden Drum, Steel Wooden Drum
Origin: China
Product Description
General Introduction Of PVC OR XLPE Insulation Armoured Power Cable
Specification
1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards.
2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity.
3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA).
4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads.
Characteristic
1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV
2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2
3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement)
4. Conductor Material:
6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL)
6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)
5. Conductor Classification:
The conductor have been divided into 2 classes.
Class 1:Solid Conductor
Class 2:Stranded Conductor
6. Insulation Material:XLPE or PVC
XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties.
PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable.
7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA
Alumnium Armoured: AWA
8. Sheath Material(if have):PVC or PE or Polyolefin
PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability.
Type & Structure:
1. Copper Core-CU
1.CU Core /PVC Insulation/SWA/PVC Sheath
2. CU Core /PVC Insulation/STA/PVC Sheath
3. CU Core /PVC Insulation/AWA/PVC Sheath
4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
2. Aluminium Core-AL
1.AL Core /PVC Insulation/SWA/PVC Sheath
2. AL Core /PVC Insulation/STA/PVC Sheath
3. AL Core /PVC Insulation/AWA/PVC Sheath
4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 25, Huancheng East Road, Liushi, Yueqing, Wenzhou - 325604 , Wenzhou - , China Phone: 86-577-62796922 Fax:86-577-62761815 |
Model NO:Armoured Power Cable
Voltage:Low and Medium Voltage Cable
Insulation Material:XLPE
Material Shape:Round Wire
Certification:ISO CCC CE VDE SABS
Brand:Lonheo
Numbers of Cores: 1-5
Class of Conductor:Stranded or Solid
Sheath:PVC,PE,LSZH
Trademark: lonheo
Specification: IEC
HS Code: 8544492100
Application: Construction, Underground, Industrial, Power Station
Current: AC Cable
Sheath Material: PVC
Wire Core Material: Copper or Aluminium
Model: Armoured Power Cable
Rated Voltage: Lower and Medium
Size: 1.5-1000mm2
Insulation: PVC,XLPE
Armoured Layer: Steel Wire,Steel Tape
Package: Steel Drum, Wooden Drum, Steel Wooden Drum
Origin: China
Product Description
General Introduction Of PVC OR XLPE Insulation Armoured Power Cable
Specification
1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards.
2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity.
3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA).
4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads.
Characteristic
1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV
2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2
3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement)
4. Conductor Material:
6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL)
6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)
5. Conductor Classification:
The conductor have been divided into 2 classes.
Class 1:Solid Conductor
Class 2:Stranded Conductor
6. Insulation Material:XLPE or PVC
XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties.
PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable.
7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA
Alumnium Armoured: AWA
8. Sheath Material(if have):PVC or PE or Polyolefin
PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability.
Type & Structure:
1. Copper Core-CU
1.CU Core /PVC Insulation/SWA/PVC Sheath
2. CU Core /PVC Insulation/STA/PVC Sheath
3. CU Core /PVC Insulation/AWA/PVC Sheath
4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
2. Aluminium Core-AL
1.AL Core /PVC Insulation/SWA/PVC Sheath
2. AL Core /PVC Insulation/STA/PVC Sheath
3. AL Core /PVC Insulation/AWA/PVC Sheath
4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: A-14/2, Mayapuri Phase - 1 , Delhi - , India Phone: 25144496/25131086/25132203 Fax:25131184 |
Model NO:Armoured Power Cable
Voltage:Low and Medium Voltage Cable
Insulation Material:XLPE
Material Shape:Round Wire
Certification:ISO CCC CE VDE SABS
Brand:Lonheo
Numbers of Cores: 1-5
Class of Conductor:Stranded or Solid
Sheath:PVC,PE,LSZH
Trademark: lonheo
Specification: IEC
HS Code: 8544492100
Application: Construction, Underground, Industrial, Power Station
Current: AC Cable
Sheath Material: PVC
Wire Core Material: Copper or Aluminium
Model: Armoured Power Cable
Rated Voltage: Lower and Medium
Size: 1.5-1000mm2
Insulation: PVC,XLPE
Armoured Layer: Steel Wire,Steel Tape
Package: Steel Drum, Wooden Drum, Steel Wooden Drum
Origin: China
Product Description
General Introduction Of PVC OR XLPE Insulation Armoured Power Cable
Specification
1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards.
2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity.
3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA).
4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads.
Characteristic
1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV
2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2
3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement)
4. Conductor Material:
6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL)
6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)
5. Conductor Classification:
The conductor have been divided into 2 classes.
Class 1:Solid Conductor
Class 2:Stranded Conductor
6. Insulation Material:XLPE or PVC
XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties.
PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable.
7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA
Alumnium Armoured: AWA
8. Sheath Material(if have):PVC or PE or Polyolefin
PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability.
Type & Structure:
1. Copper Core-CU
1.CU Core /PVC Insulation/SWA/PVC Sheath
2. CU Core /PVC Insulation/STA/PVC Sheath
3. CU Core /PVC Insulation/AWA/PVC Sheath
4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
2. Aluminium Core-AL
1.AL Core /PVC Insulation/SWA/PVC Sheath
2. AL Core /PVC Insulation/STA/PVC Sheath
3. AL Core /PVC Insulation/AWA/PVC Sheath
4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: B-336, Rajendra Nagar , Bareilly - , India Phone: 3291383 Fax:2480082 |
Model NO:Armoured Power Cable
Voltage:Low and Medium Voltage Cable
Insulation Material:XLPE
Material Shape:Round Wire
Certification:ISO CCC CE VDE SABS
Brand:Lonheo
Numbers of Cores: 1-5
Class of Conductor:Stranded or Solid
Sheath:PVC,PE,LSZH
Trademark: lonheo
Specification: IEC
HS Code: 8544492100
Application: Construction, Underground, Industrial, Power Station
Current: AC Cable
Sheath Material: PVC
Wire Core Material: Copper or Aluminium
Model: Armoured Power Cable
Rated Voltage: Lower and Medium
Size: 1.5-1000mm2
Insulation: PVC,XLPE
Armoured Layer: Steel Wire,Steel Tape
Package: Steel Drum, Wooden Drum, Steel Wooden Drum
Origin: China
Product Description
General Introduction Of PVC OR XLPE Insulation Armoured Power Cable
Specification
1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards.
2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity.
3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA).
4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads.
Characteristic
1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV
2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2
3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement)
4. Conductor Material:
6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL)
6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)
5. Conductor Classification:
The conductor have been divided into 2 classes.
Class 1:Solid Conductor
Class 2:Stranded Conductor
6. Insulation Material:XLPE or PVC
XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties.
PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable.
7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA
Alumnium Armoured: AWA
8. Sheath Material(if have):PVC or PE or Polyolefin
PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability.
Type & Structure:
1. Copper Core-CU
1.CU Core /PVC Insulation/SWA/PVC Sheath
2. CU Core /PVC Insulation/STA/PVC Sheath
3. CU Core /PVC Insulation/AWA/PVC Sheath
4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
2. Aluminium Core-AL
1.AL Core /PVC Insulation/SWA/PVC Sheath
2. AL Core /PVC Insulation/STA/PVC Sheath
3. AL Core /PVC Insulation/AWA/PVC Sheath
4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: No.2 Hua Gong Road, Xiao Sheng Miao , Tongzhou - , China Phone: 86-10-61566670 |
Model NO:Armoured Power Cable
Voltage:Low and Medium Voltage Cable
Insulation Material:XLPE
Material Shape:Round Wire
Certification:ISO CCC CE VDE SABS
Brand:Lonheo
Numbers of Cores: 1-5
Class of Conductor:Stranded or Solid
Sheath:PVC,PE,LSZH
Trademark: lonheo
Specification: IEC
HS Code: 8544492100
Application: Construction, Underground, Industrial, Power Station
Current: AC Cable
Sheath Material: PVC
Wire Core Material: Copper or Aluminium
Model: Armoured Power Cable
Rated Voltage: Lower and Medium
Size: 1.5-1000mm2
Insulation: PVC,XLPE
Armoured Layer: Steel Wire,Steel Tape
Package: Steel Drum, Wooden Drum, Steel Wooden Drum
Origin: China
Product Description
General Introduction Of PVC OR XLPE Insulation Armoured Power Cable
Specification
1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards.
2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity.
3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA).
4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads.
Characteristic
1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV
2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2
3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement)
4. Conductor Material:
6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL)
6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)
5. Conductor Classification:
The conductor have been divided into 2 classes.
Class 1:Solid Conductor
Class 2:Stranded Conductor
6. Insulation Material:XLPE or PVC
XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties.
PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable.
7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA
Alumnium Armoured: AWA
8. Sheath Material(if have):PVC or PE or Polyolefin
PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability.
Type & Structure:
1. Copper Core-CU
1.CU Core /PVC Insulation/SWA/PVC Sheath
2. CU Core /PVC Insulation/STA/PVC Sheath
3. CU Core /PVC Insulation/AWA/PVC Sheath
4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
2. Aluminium Core-AL
1.AL Core /PVC Insulation/SWA/PVC Sheath
2. AL Core /PVC Insulation/STA/PVC Sheath
3. AL Core /PVC Insulation/AWA/PVC Sheath
4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: V-2, Red Cross Road, Near 1301 M.I.E. , Bahadurgarh - , India Phone: 268568/56225190 |
Model NO:Armoured Power Cable
Voltage:Low and Medium Voltage Cable
Insulation Material:XLPE
Material Shape:Round Wire
Certification:ISO CCC CE VDE SABS
Brand:Lonheo
Numbers of Cores: 1-5
Class of Conductor:Stranded or Solid
Sheath:PVC,PE,LSZH
Trademark: lonheo
Specification: IEC
HS Code: 8544492100
Application: Construction, Underground, Industrial, Power Station
Current: AC Cable
Sheath Material: PVC
Wire Core Material: Copper or Aluminium
Model: Armoured Power Cable
Rated Voltage: Lower and Medium
Size: 1.5-1000mm2
Insulation: PVC,XLPE
Armoured Layer: Steel Wire,Steel Tape
Package: Steel Drum, Wooden Drum, Steel Wooden Drum
Origin: China
Product Description
General Introduction Of PVC OR XLPE Insulation Armoured Power Cable
Specification
1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards.
2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity.
3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA).
4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads.
Characteristic
1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV
2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2
3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement)
4. Conductor Material:
6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL)
6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)
5. Conductor Classification:
The conductor have been divided into 2 classes.
Class 1:Solid Conductor
Class 2:Stranded Conductor
6. Insulation Material:XLPE or PVC
XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties.
PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable.
7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA
Alumnium Armoured: AWA
8. Sheath Material(if have):PVC or PE or Polyolefin
PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability.
Type & Structure:
1. Copper Core-CU
1.CU Core /PVC Insulation/SWA/PVC Sheath
2. CU Core /PVC Insulation/STA/PVC Sheath
3. CU Core /PVC Insulation/AWA/PVC Sheath
4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
2. Aluminium Core-AL
1.AL Core /PVC Insulation/SWA/PVC Sheath
2. AL Core /PVC Insulation/STA/PVC Sheath
3. AL Core /PVC Insulation/AWA/PVC Sheath
4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 4D/5, 1st Floor, Old Rajinder Nagar , Delhi - , India Phone: 25740683/25740545/51030545 Fax:25740545 |
Model NO:Armoured Power Cable
Voltage:Low and Medium Voltage Cable
Insulation Material:XLPE
Material Shape:Round Wire
Certification:ISO CCC CE VDE SABS
Brand:Lonheo
Numbers of Cores: 1-5
Class of Conductor:Stranded or Solid
Sheath:PVC,PE,LSZH
Trademark: lonheo
Specification: IEC
HS Code: 8544492100
Application: Construction, Underground, Industrial, Power Station
Current: AC Cable
Sheath Material: PVC
Wire Core Material: Copper or Aluminium
Model: Armoured Power Cable
Rated Voltage: Lower and Medium
Size: 1.5-1000mm2
Insulation: PVC,XLPE
Armoured Layer: Steel Wire,Steel Tape
Package: Steel Drum, Wooden Drum, Steel Wooden Drum
Origin: China
Product Description
General Introduction Of PVC OR XLPE Insulation Armoured Power Cable
Specification
1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards.
2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity.
3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA).
4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads.
Characteristic
1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV
2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2
3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement)
4. Conductor Material:
6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL)
6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)
5. Conductor Classification:
The conductor have been divided into 2 classes.
Class 1:Solid Conductor
Class 2:Stranded Conductor
6. Insulation Material:XLPE or PVC
XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties.
PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable.
7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA
Alumnium Armoured: AWA
8. Sheath Material(if have):PVC or PE or Polyolefin
PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability.
Type & Structure:
1. Copper Core-CU
1.CU Core /PVC Insulation/SWA/PVC Sheath
2. CU Core /PVC Insulation/STA/PVC Sheath
3. CU Core /PVC Insulation/AWA/PVC Sheath
4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
2. Aluminium Core-AL
1.AL Core /PVC Insulation/SWA/PVC Sheath
2. AL Core /PVC Insulation/STA/PVC Sheath
3. AL Core /PVC Insulation/AWA/PVC Sheath
4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Survey No.50/15/1, Infront of Dhayareshwar Eng. Pvt. Ltd., Narhe road, Kute Ind. Estate , Pune - , India Phone: 24394477 Fax:24352678 |
Model NO:Armoured Power Cable
Voltage:Low and Medium Voltage Cable
Insulation Material:XLPE
Material Shape:Round Wire
Certification:ISO CCC CE VDE SABS
Brand:Lonheo
Numbers of Cores: 1-5
Class of Conductor:Stranded or Solid
Sheath:PVC,PE,LSZH
Trademark: lonheo
Specification: IEC
HS Code: 8544492100
Application: Construction, Underground, Industrial, Power Station
Current: AC Cable
Sheath Material: PVC
Wire Core Material: Copper or Aluminium
Model: Armoured Power Cable
Rated Voltage: Lower and Medium
Size: 1.5-1000mm2
Insulation: PVC,XLPE
Armoured Layer: Steel Wire,Steel Tape
Package: Steel Drum, Wooden Drum, Steel Wooden Drum
Origin: China
Product Description
General Introduction Of PVC OR XLPE Insulation Armoured Power Cable
Specification
1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards.
2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity.
3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA).
4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads.
Characteristic
1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV
2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2
3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement)
4. Conductor Material:
6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL)
6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)
5. Conductor Classification:
The conductor have been divided into 2 classes.
Class 1:Solid Conductor
Class 2:Stranded Conductor
6. Insulation Material:XLPE or PVC
XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties.
PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable.
7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA
Alumnium Armoured: AWA
8. Sheath Material(if have):PVC or PE or Polyolefin
PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability.
Type & Structure:
1. Copper Core-CU
1.CU Core /PVC Insulation/SWA/PVC Sheath
2. CU Core /PVC Insulation/STA/PVC Sheath
3. CU Core /PVC Insulation/AWA/PVC Sheath
4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
2. Aluminium Core-AL
1.AL Core /PVC Insulation/SWA/PVC Sheath
2. AL Core /PVC Insulation/STA/PVC Sheath
3. AL Core /PVC Insulation/AWA/PVC Sheath
4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: G-40, Kundan Kushal Nager, Next To Kirloskar Oil Engines, Khadki , Mumbai - , India Phone: 65221848 Fax:25819952 |
https://www.realprinterfix247.us/fix-hp-printer-is-offline-issue-windows-10/ We have found you the right place to have online help for HP Printer Support in the USA.
It offers the best technicians to resolve any issues with HP computer support, HP laptops
assistant, HP printers assistant, HP desktop assistant, and alternative parallel devices,
etc. We are providing independent remote support services for HP users facing a different
level of technical problems with their Hewlett Packard Enterprise devices like Desktop
Computers, Laptops, Printers, Scanners, and Tablets. We will give you the best Business
Customer Support so that you feel relax and let us do the task for you with no worries
and no pressure. Isn’t it awesome? Of course, it
Address: California, USA , California - , United States Phone: 180055196 Fax:8006082315 |
Model NO:Armoured Power Cable
Voltage:Low and Medium Voltage Cable
Insulation Material:XLPE
Material Shape:Round Wire
Certification:ISO CCC CE VDE SABS
Brand:Lonheo
Numbers of Cores: 1-5
Class of Conductor:Stranded or Solid
Sheath:PVC,PE,LSZH
Trademark: lonheo
Specification: IEC
HS Code: 8544492100
Application: Construction, Underground, Industrial, Power Station
Current: AC Cable
Sheath Material: PVC
Wire Core Material: Copper or Aluminium
Model: Armoured Power Cable
Rated Voltage: Lower and Medium
Size: 1.5-1000mm2
Insulation: PVC,XLPE
Armoured Layer: Steel Wire,Steel Tape
Package: Steel Drum, Wooden Drum, Steel Wooden Drum
Origin: China
Product Description
General Introduction Of PVC OR XLPE Insulation Armoured Power Cable
Specification
1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards.
2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity.
3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA).
4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads.
Characteristic
1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV
2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2
3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement)
4. Conductor Material:
6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL)
6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)
5. Conductor Classification:
The conductor have been divided into 2 classes.
Class 1:Solid Conductor
Class 2:Stranded Conductor
6. Insulation Material:XLPE or PVC
XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties.
PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable.
7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA
Alumnium Armoured: AWA
8. Sheath Material(if have):PVC or PE or Polyolefin
PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability.
Type & Structure:
1. Copper Core-CU
1.CU Core /PVC Insulation/SWA/PVC Sheath
2. CU Core /PVC Insulation/STA/PVC Sheath
3. CU Core /PVC Insulation/AWA/PVC Sheath
4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
2. Aluminium Core-AL
1.AL Core /PVC Insulation/SWA/PVC Sheath
2. AL Core /PVC Insulation/STA/PVC Sheath
3. AL Core /PVC Insulation/AWA/PVC Sheath
4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Wz1a, Uttam Nagar (w) , Delhi - , India Phone: 91-11-9717025592 Fax:-- |
Model NO:Armoured Power Cable
Voltage:Low and Medium Voltage Cable
Insulation Material:XLPE
Material Shape:Round Wire
Certification:ISO CCC CE VDE SABS
Brand:Lonheo
Numbers of Cores: 1-5
Class of Conductor:Stranded or Solid
Sheath:PVC,PE,LSZH
Trademark: lonheo
Specification: IEC
HS Code: 8544492100
Application: Construction, Underground, Industrial, Power Station
Current: AC Cable
Sheath Material: PVC
Wire Core Material: Copper or Aluminium
Model: Armoured Power Cable
Rated Voltage: Lower and Medium
Size: 1.5-1000mm2
Insulation: PVC,XLPE
Armoured Layer: Steel Wire,Steel Tape
Package: Steel Drum, Wooden Drum, Steel Wooden Drum
Origin: China
Product Description
General Introduction Of PVC OR XLPE Insulation Armoured Power Cable
Specification
1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards.
2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity.
3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA).
4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads.
Characteristic
1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV
2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2
3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement)
4. Conductor Material:
6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL)
6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)
5. Conductor Classification:
The conductor have been divided into 2 classes.
Class 1:Solid Conductor
Class 2:Stranded Conductor
6. Insulation Material:XLPE or PVC
XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties.
PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable.
7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA
Alumnium Armoured: AWA
8. Sheath Material(if have):PVC or PE or Polyolefin
PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability.
Type & Structure:
1. Copper Core-CU
1.CU Core /PVC Insulation/SWA/PVC Sheath
2. CU Core /PVC Insulation/STA/PVC Sheath
3. CU Core /PVC Insulation/AWA/PVC Sheath
4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
2. Aluminium Core-AL
1.AL Core /PVC Insulation/SWA/PVC Sheath
2. AL Core /PVC Insulation/STA/PVC Sheath
3. AL Core /PVC Insulation/AWA/PVC Sheath
4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: E-711, Dsidc, Narela Industrial Area , Delhi - , India Phone: 11-91-0019127781258 Fax:11-91-0019125552754 |
Model NO:Armoured Power Cable
Voltage:Low and Medium Voltage Cable
Insulation Material:XLPE
Material Shape:Round Wire
Certification:ISO CCC CE VDE SABS
Brand:Lonheo
Numbers of Cores: 1-5
Class of Conductor:Stranded or Solid
Sheath:PVC,PE,LSZH
Trademark: lonheo
Specification: IEC
HS Code: 8544492100
Application: Construction, Underground, Industrial, Power Station
Current: AC Cable
Sheath Material: PVC
Wire Core Material: Copper or Aluminium
Model: Armoured Power Cable
Rated Voltage: Lower and Medium
Size: 1.5-1000mm2
Insulation: PVC,XLPE
Armoured Layer: Steel Wire,Steel Tape
Package: Steel Drum, Wooden Drum, Steel Wooden Drum
Origin: China
Product Description
General Introduction Of PVC OR XLPE Insulation Armoured Power Cable
Specification
1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards.
2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity.
3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA).
4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads.
Characteristic
1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV
2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2
3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement)
4. Conductor Material:
6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL)
6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)
5. Conductor Classification:
The conductor have been divided into 2 classes.
Class 1:Solid Conductor
Class 2:Stranded Conductor
6. Insulation Material:XLPE or PVC
XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties.
PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable.
7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA
Alumnium Armoured: AWA
8. Sheath Material(if have):PVC or PE or Polyolefin
PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability.
Type & Structure:
1. Copper Core-CU
1.CU Core /PVC Insulation/SWA/PVC Sheath
2. CU Core /PVC Insulation/STA/PVC Sheath
3. CU Core /PVC Insulation/AWA/PVC Sheath
4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
2. Aluminium Core-AL
1.AL Core /PVC Insulation/SWA/PVC Sheath
2. AL Core /PVC Insulation/STA/PVC Sheath
3. AL Core /PVC Insulation/AWA/PVC Sheath
4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Liuqing Industrial Zone, Liushi, Yueqing, Wenzhou - 325604 , Wenzhou - , China Phone: 86-577-27879944 Fax:86-577-62779940 |
|
||||