We providethe PLC/SCADA/Vision System Validation to ensure all the function of the Control System is installed properly and the working properly.M/s PHOTON VALIDATIONperform the same using the GAMP5 in order to match the preferred standards of Validation and is glad

We providethe PLC/SCADA/Vision System Validation to ensure all the function of the Control System is installed properly and the working properly.M/s PHOTON VALIDATIONperform the same using the GAMP5 in order to match the preferred standards of Validation and is glad to add value to the quality of industry and also identify the risk and medicate the risk as per ICH Q 9 Guideline and also assess the system is compliance with 21 CFR part 11 or not.We provide validation for all the Production Equipment, Lyophilizer system, Autoclave, BMS, UMS, Water System, SCADA, Incubators etc

Cleanrooms are validated and then certified to a chosen class of ISO 14644-1. Each class of ISO14544-1 has its unique requirements that must be made for a facility to be classified in the specified classification. Cleanroom Validation is performed including Air flow test, Filter Integrity test, non-viable particle count, Area Recovery test, Visual air flow patent. Lux and Sound Measurements of all clean room, Laminar Air Flow (Vertical Horizontal), DHS, Pass Box and warehouses.

Pure steam Quality test is perform to ensure that the steam which we used is pure to ensure this we perform the following test. Dryness Fraction test, Super heat test, and Presence of Non condensable Gas.

We provide Software Validation to ensure all the function of the Computer System is installed properly and the working properly. We perform activity using the GAMP5 in order to match the preferred standards of Validation and add value to the quality of industry and also identify the risk and medicate the risk as per ICH Q 9 Guideline and also assess the system is compliance with 21 CFR part 11 or not.We provide Validation for all type of software except web base like SAP System Empower etc.

We provide Validation to ensure performance of the equipment and AHU corresponding to the Room requirements. The validation will ensure the rate of temperature change per min / hrs. We provide the Validation for Autoclave, DHS, Lyophilizer, Tunnel, Mixing Vessel, Storage Tank, Environment Chamber, Incubators (BOD, COD, CO2, ), Bio-safety cabinet (including intensity), Ovens, Micro Ovens, Dry block , water bath, shaker, Freezers, deep Freezers, Muffle furnace etc. Room temperature RH monitoring of all Clean room and Warehouses etc.

Indoor Air Quality test is perform to ensure that the Air which is used at production end is pure and was not heaving the hazardous gas and non-viable particles are within the limit as per class of ISO14544-1. This test includes Presence of CO, CO2, SO2 N2, moisture Content, non-viable particle etc.