The cable as a new-type aerial cable is used for transmitting electric power overhead, extensively used in rebuilding of urban and forest region electrified wire netting. It improves the safety and reliance of electrified wire netting. Construction: The conductors are 1350-H19 aluminum ,6201-T81 Aluminum Alloy , or ACSR conductors, concentrically stranded and covered for weather proofing with polyethylene, high density polyethylene(HD) or crosslinked polyethylene(XLPE). Standard: Service drop cable(ABC cable) meets or exceeds the following ASTM specifications: · B-230 Aluminum Wire, 1350-H19 for Electrical Purposes. · B-231 Aluminum Conductors, Concentric-Lay-Stranded. · B-232 Aluminum Conductors, Concentric-Lay-Stranded, Coated Steel Reinforced (ACSR). · B-399 Concentric-Lay-Stranded 6201-T81 Aluminum Alloy Conductors. · B-901 Compressed Round Stranded Aluminum Conductors Using Single Input Wire

Standards IEC61089, BS215 part2, ASTM B232, DIN48204, BS EN50182, JIS C3110 Certificate ISO 9001 and ISO 14001. CE ,SONCAP Type AAC, AAAC, ACSR, AACSR&ACAR conductor AAC, AAAC, ACSR, AACSR, ACAR conductor widely used in power transmission lines with various voltage levels. Since they have such good characteristics as simple structure, convenient installation and maintenance, low cost for the line, large transmission capacity and are also suitable for laying across rivers and valleys where special geographical teatures exist. 1. Specification: (1) all aluminium conductor (AAC) (2) all aluminimum alloy conductor(AAAC) (3) aluminum conductor steel reinforced (ACSR) (4) anti-corrosion type ACSR (5) aluminimum conductor aluminimum clad steel reinforced(ACSR/AW) (6) rear earth aluminimum conductor steel reinforced(ACSR/RE) (7) aluminimum conductor aluminimum alloy reinforced(ACAR) 2. Elative manufacturing standards: IEC83, IEC1089, 31, B232, BS215, DIN48204. 1). Standard: IEC61089, BS215 part2, ASTM B232, DIN48204, BS EN50182. 2). Specification: ACSR is composed by bare concentric-lay-stranded galvanized steel wire(s) with aluminum wires surrounded by one or more layers of helically. Greased ACSR can also be supplied. 3). Application: ACSR is widely used in overhead electric power transmission and distribution lines with various voltage levels. All Aluminum Conductor(AAC) & Aluminum Conductor Steel Reinforced(ACSR))for ASTM (AAC, ACCR, AAAC, ACSR) Generally Confirming to IS 398 (Part-I, II, IV), IEC-228 (AAAC) Conductor as per ASTM-B-399-1992 (AAAC) Conductor as per BS-3242-1970 (AAAC) Conductor IS: 398-IV-1994 (ACSR) as per ASTM-B-233-1992 (AAC) as per BS-215-1-1970 (AAC) as per IS-398-1: 1976 (AAC) as per ASTM-B-231-1990 (ACSR) as per IS: 398-II: 1976 & IS: 398-V: 1992 (ACSR) BS-215-II-1970 (AACSR) as per IEC-1089-1191 AAC(All aluminum conductor) are suited for overhead power line. We can supply this conductor according to different recognized standards, such as IEC61089, BS215, BS EN 50182: 2001, ASTM B231, CSA C49, DIN480201, JIS C3109, customer special specification also can be satisfied. ACSR or ACSR cable or ACSR conductor used for Overhead electrical distribution and transmission lines for distributing power. Applications: Used as bare overhead transmission cable and as primary and secondary distribution cable. ACSR offers optimal strength for line design. Variable steel core stranding enables desired strength to be achieved without sacrificing ampacity. Construction: Aluminum alloy 1350-H-19 wires, concentrically stranded about a steel core. Core wire for ACSR is available with class A, B, or C galvanizing; ""aluminized"" aluminum coated (AZ); Or aluminum-clad (AW). Additional corrosion protection is available through the application of grease to the corrosion or infusion of the complete cable with grease. Specifications: ACSR bare conductor meets or exceeds the following ASTM specifications: B-230 Aluminum Wire, 1350-H19 for Electrical Purposes B-231 Aluminum Conductors, Concentric-Lay-Stranded B-232 Aluminum Conductors, Concentric-Lay-Stranded, Coated Steel Reinforced (ACSR) B-341 Aluminum-clad Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR/AW) B-498 Zinc-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR/AZ) B-500 Zinc Coated and Aluminum Coated Stranded Steel Core for Aluminum Conductors, Steel Reinforced (ACSR)

AAC All Aluminium Conductor,AAAC All Aluminium Alloy Conductor.The conductors are suitable for use in spans on wood poles, transmission towers,and other structures where tensile strength and temperature ratings are not required. Application range from extra high voltage(EHV) transmission lines to sub-service spans at distribution or utilization voltages on private premises. AAC(All aluminum conductor) is the most economical bare overhead conductor due to its lighter weight. It offers easier handing during installation and use of simpler fittings. The conductor is corrosion resistant due to its homogeneous construction.

Cu/Al Conductor PVC Insulated Power Cable.The long-time permissible working temperature of cable conductive core is not more than 70 °C. 2.During short circuit (max. permanent time is not more than 5 seconds), the max temperature of cable conductor is not more than 165°C. 3.The difference level of laying cable is not restricted.When laying the cable,ambient temperature is not lower than 0°C. 4.They have good chemical stability,and properties of acid resistance,alkali resistance,salt resistance,oil resistance,solvent resistance and flame resistance.rty 5.Light weight,good bending property and easy installation and maintenance.

Used as bare overhead conductor for primary and secondary distribution. Designed utilizing a high-strength aluminum alloy to achieve a high strength-to-weight ratio; affords better sag characteristics. Aluminum alloy gives AAAC higher resistance to corrosion than ACSR.